Sistema de gestión técnica y su incidencia en los factores de riesgos mecánicos en la planta de tratamiento de agua potable del cantón el Empalme 2022

dc.contributor.advisorPérez Toapanta, Adriano
dc.contributor.authorContreras Rodríguez, Erick Fernando
dc.contributor.authorSolórzano León, Jimmy Neptaly
dc.date.accessioned2022-07-18T17:07:25Z
dc.date.available2022-07-18T17:07:25Z
dc.date.issued2022
dc.descriptionThe present investigation work had as objective carry out the design of a technical management system for the prevention of existing mechanical risks in the drinking water treatment plant of El Empalme, referring to two fundamental aspects, the current situation regarding mechanical risks and alternatives for the application of a management system that mitigates risks mentioned. Objectives proposed through the collection of information in the plant, which revealed the problem: There is no management system in this specific plant, as well as a department of safety and health of the workers in the plant where an operational control is carried out. For this reason, the first objective suggested for the identification of the current situation of the plant through of the technical guides GTC-45, then through the indicators of morbidity and accident rate of staff, were found the diseases that they have and the knowledge for the exposed risks, accidents and labor incidents. As a last objective, a design of alternatives based on technical management system in this investigation was projected, aimed at the prevention of mechanical risks. The evaluation of risk level was made through Colombian technical guide GTC-45 in the 8 processes that carried out in the plant to the 15 operational workers of the same, with the purpose of ascertaining the danger of the mechanical risks, being the admission processes and water distribution the highest followed by the pre-chlorination process. Finally, we made the suggestions regarding to the management system indicating the activities to do, controls in the font, way and receiver to automate certain activities of the processes, reducing the mechanical risk level and the exposition to occupational diseases. It demands a timely attention of Municipal Gad and the manager in charge of the drinking water and into the possibilities, the application of suggestions described in this investigative project. Key words: Management system, mechanical risks, accidents and labor incidents, prevention of labor riskses_ES
dc.description.abstractEl presente trabajo de investigación tuvo como objetivo realizar el diseño de un sistema de gestión técnica para la prevención de los riesgos mecánicos existentes en la planta de tratamiento de agua potable del cantón El Empalme, haciendo referencia a dos aspectos fundamentales, la situación actual frente a los riesgos mecánicos y alternativas para la aplicación de un sistema de gestión que mitigue dichos riesgos. Los objetivos se plantearon a través de la recopilación de información en la planta, mismo que revelo la problemática: no existe un sistema de gestión en esta planta en específico, así como un departamento de seguridad y salud de los trabajadores en la planta en la cual se realice un control operativo, por esta razón se planteó el primer objetivo en la identificación de la situación actual de la planta mediante la aplicación de la guía técnica GTC-45, luego mediante los indicadores de morbilidad y accidentabilidad del personal se constató de forma directa las enfermedades que poseen y el conocimiento ante los riesgos expuestos, accidentes e incidentes laborales, como último objetivo se propuso un diseño de alternativas basados en el sistema de gestión técnica en esta investigación, encaminado a la prevención de los riesgos mecánicos. La evaluación del nivel de riesgo se efectuó mediante la guía técnica colombiana GTC-45 en los 8 procesos que se realizan en la planta a los 15 trabajadores operativos de la misma, con el fin de constatar la peligrosidad de los riesgos mecánicos, siendo los procesos de admisión y distribución del agua los más elevados seguidos por el proceso de pre-cloración, por último se realizó sugerencias referentes al sistema de gestión indicando las actividades a realizar, controles en la fuente, medio y receptor para automatizar en ciertas actividades de los procesos, reduciendo el nivel de riesgo mecánico y la exposición a enfermedades profesionales, los mismos que demanda una atención oportuna del Gad municipal y el director encargado de la planta de agua potable y de ser posible la aplicación de las sugerencias descritas en este proyecto investigativo. Palabras clave: Morbilidad, accidentabilidad, accidentes e incidentes de trabajo, prevención de riesgos laborales.es_ES
dc.format.extent188 p.es_ES
dc.identifier.citationContreras Rodríguez Erick Fernando, Solórzano León Jimmy Neptaly(2022) "Sistema de gestión técnica y su incidencia en los factores de riesgos mecánicos en la planta de tratamiento de agua potable del cantón el Empalme 2022".Quevedo:UTEQ.188pes_ES
dc.identifier.other440034
dc.identifier.urihttps://repositorio.uteq.edu.ec/handle/43000/6622
dc.publisherQuevedo:UTEQes_ES
dc.rightsopenAccesses_ES
dc.subject: Morbilidades_ES
dc.subjectAccidentabilidades_ES
dc.subjectAccidentes e incidentes de trabajoes_ES
dc.subjectPrevención de riesgos laboraleses_ES
dc.titleSistema de gestión técnica y su incidencia en los factores de riesgos mecánicos en la planta de tratamiento de agua potable del cantón el Empalme 2022es_ES
dc.typebachelorThesises_ES

Files

Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
T-UTEQ-34.pdf
Size:
4.03 MB
Format:
Adobe Portable Document Format
Description:
Tesis a texto completo
License bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description: