Diseño de un sistema de seguridad industrial en el laboratorio de química de la Universidad Técnica Estatal de Quevedo, basado en el control operativo integral
Authors
Loading...
Date
2018
Directors
Journal Title
Journal ISSN
Volume Title
Publisher
Quevedo-Ecuador
Abstract
presente investigación contiene las pautas necesarias para el Diseño de un Sistema de
Seguridad Industrial. El objetivo central es que permita identificar los riesgos en la fuente,
en el medio y en el receptor, basado en el control operativo integral, donde se pretende
orientar al personal administrativo, docentes y estudiantes tomar en cuenta las medidas de
prevención al momento de ingresar a realizar sus respetivas prácticas, para prevenir futuros
accidentes que se pueden generar al realizar cualquier actividad. Para lograr lo
anteriormente descrito se elaboró la matriz de riesgos Colombiana Icontec GTC45, donde
se identificó cada uno de los riesgos que presenta el laboratorio, posteriormente se los
clasificó según su grado de aceptabilidad dentro de las 11 actividades, donde se logró
conocer el nivel de probabilidad siendo alto en 4 actividades y medio en las 7 restantes con
aceptabilidad de riesgo Aceptable y No Aceptable, para luego evaluarlos según normas
vigentes para cada uno de los riesgos, se usó el método de evaluación REBA para evaluar
posturas forzadas, seguidamente se aplicó el Cuestionario ISTAS21 para evaluar riesgos
psicosociales y la matriz de riesgo de William Fine para evaluar riesgos químicos, y
físicos, se realizó un análisis de la situación actual del laboratorio respecto a la gestión
técnica, control operativo integral donde se detalló que el mismo no cuenta con una gestión
de auditorías que le brinde información sobre la seguridad y salud en el trabajo.
Finalmente, para lograrlo se tomó los riesgos con un grado peligrosidad no aceptable para
desarrollar la propuesta: Diseño de procedimientos para disminuir riesgos identificados en
la fuente, en el medio y en el receptor en el Laboratorio de Química de la Universidad
Técnica Estatal de Quevedo, donde se detalló las medidas de control que deben optar para
prevenir accidentes futuros. Palabras Claves:
Riesgo, Fuente, Medio, Receptor, Control Operativo Integral, Procedimientos
Description
This research contains the necessary guidelines for the design of an Industrial safety
system. The main objective is to identify the risks in the source, in the middle and the
receiver, based on the integral operational control, where it is intended to guide the
administrative staff, teachers and students take into account the preventive measures to
Time to enter to perform their respective practices, to prevent future accidents that can be
generated when performing any activity. In order to achieve the aforementioned, the
Colombian risk matrix Icontec GTC45 was developed, where each of the risks presented
by the laboratory was identified, then they were classified according to their degree of
acceptability within the 11 activities, where Was able to know the level of probability
being high in 4 and a half activities in the remaining 7 with acceptable and unacceptable
risk acceptability, and then evaluated according to current norms for each of the risks, the
REBA evaluation method was used to evaluate Forced postures, the ISTAS21
questionnaire was then applied to evaluate psychosocial risks and the risk matrix of
William Fine to evaluate chemical and physical risks, an analysis of the current situation of
the laboratory with respect to the management was carried out. Technical, comprehensive
operational control where it was explained that it does not have an audit management that
provides information on safety and health at work. Finally, to achieve this, the risks were
taken with a dangerous degree not acceptable to develop the proposal: design of
procedures to reduce risks identified in the source, in the middle and in the receiver in the
laboratory of Chemistry of the Universidad Técnica Estatal de Quevedo, where the control
measures to prevent future accidents were detailed.
Keywords:
Risk, source, medium, receiver, Integral operational Control, procedures.
Keywords
Riesgo, Fuente, Medio, Receptor,, Control Operativo Integral,Procedimientos,
Citation
Ricaurte Alvarado, Enma Daniela. (2018). Diseño de un sistema de seguridad industrial en el laboratorio de química de la Universidad Técnica Estatal de Quevedo, basado en el control operativo integral. Quevedo. UTEQ. 97p.